Applications

Small cold rooms
Commercial refrigeration cold rooms

Capacity Range

Unit coolers: EMEA from 0,99 to 22,5 kW
Unit coolers: APAC from 2,48 to 24,28 kW

Brine coolers: EMEA please use Scelte selection software
Brine coolers: APAC please contact us

Download

EMEA:
Commercial Coolers General Catalog (English, German, Russian)
Commercial Coolers General Catalog (Italian, French, Spanish)
Commercial Coolers Product Overview Brochure
Technical Manual
Technical Manual (SASO)
Declaration Of Incorporation – Test Certificate
Quick Guide

APAC:
Commercial Coolers General Catalog (Chinese)
Technical Manual

GCE Specifications

Overview

EMEA: Range consists of 105 customizable models
APAC:Range consists of 39 customizable models

According to the room temperature, the range is divided as follows:

GCE G4 E4 F4 A4 for higher temperatures (>= +1 °C) with 4 mm fin spacing
GCE G6 E6 F6 A6 for medium temperatures (≥ –15 °C) with 6 mm fin spacing, electric defrost version (ED) is recommended
GCE G8 E8 F8 A8 for low temperatures (≥ –35 °C) with 8 mm fin spacing, equipped with electric defrost (ED)

On request, the models can be equipped with non-standard: coils, defrosting, and fan motors.

Coil Features

The entire range is equipped with highly efficient coils made from aluminum fins and inner grooved tube. The new geometry allows a substantial reduction of the inner volume resulting in decreased refrigerant use. The updated coil design responds to the recent guidelines governing the reduction of HFC gases with high greenhouse effect. (smooth tube for brine coolers).

Casing

Casing Features Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film

Fan Motors

The standard AC fan motors employed have the following features:

Ø 250 mm
fan motor module: from 1 to 4
shaded pole single-phase 230V/1/50-60Hz
fibreglass charged polyamide fan guard

*EMEA only

Ø 315 mm
fan motor module: from 1 to 4
external rotor single-phase 230V/1/50-60Hz
built-in electric capacitor
epoxy coated steel fan guard

Ø 350 mm
fan motor module: from 1 to 5
external rotor single-phase 230V/1/50-60Hz
built-in electric capacitor
epoxy coated steel fan guard

The optional high efficiency EC fan motors have the following features:

Ø 250 mm
fan motor module: the same as AC fan motors
single-phase 230V/1/50-60Hz
fibreglass charged polyamide fan guard

*EMEA only

Ø 315 mm
fan motor module: the same as AC fan motors
external rotor single-phase 230V/1/50-60Hz
epoxy coated steel fan guard

Ø 350 mm
an motor module: the same as AC fan motors
external rotor single-phase 230V/1/50-60Hz
epoxy coated steel fan guard

Defrost

The electric defrost (ED) versions are equipped with stainless steel heaters with vulcanised terminals preset for 400V/3/50-60Hz connections

Wiring

The electric parts and casing are connected to an earth terminal The wiring of motors and heaters is carried out in separate IP 54 protection grade junction boxes

Certifications

CE
PED
SASO
TÜV SÜD (Please see cerfified model list on the catalogue)

Published Data

EN 328 reference standard
Nominal capacity assessed in practical operating ambient i.e. in wet conditions
Refrigerants:
- EMEA: R448A refrigerant (media glide)
- APAC: R404A refrigerant
air inlet temperature 0 °C
evaporating temperature –8 °C
TD 8 K

GCE